Downloaded from https://www.everyspec.com AMCP 706-197 TABLE 13-3 MARSEP MODELING LANGUAGE' 1 A2 (P name) This attribute states the probability that the given element works, given all proper inputs, is P name. A3 (B name, P name) Denotes the element receives an enabling input from element B name. In the absence of that input, the element will give an output with probability P name. (The probability of nonoperation given a proper enabling input is given by A2.) 4A4 (B name 1 ......... B name n) Denotes the element has enabling ouputs to the elements B name 1 ............... " " B name n. A14 (E name, P name) E name is the name of some environment.
It is any item such as HEAT, PRES 6, RAD 2, etc., that is listed as an environment. P name is the probability that the element functions in the absence of named environment. - D .A6 (T name, A name, N name, P name*, N name, P name**N name P name) Thus, A6 is followed by a compound list: T name (or V name) is the name of an input terminal to the element which is dependent upon the value of the input signal (quality input). A name is either A10 if the input is voltage.sensitive, one of the attributes, or A50 through A90 for nonvoltage sensitive sources. The A number may be left out of subsets after the first subset. In this case it will be interpreted to be the same as the last one listed.
N name is either a value of the input signal at the terminal in question (i.e., an integer) or an item with head N which will symbolically indicate a signal level. P name is the probability of operation given N name. The probability of non- operation given the usual value of N name is given in A2. Only one A6 is allowed per element. 13-6