US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com NANO ON 3 ENVININN 14ARSEP MOM EWM.A NMW PNemw *MUNY RAlTRY PV9LT Ss ai Ibmy S.OFIT PSTG Sialvdh. START PCLOS.O1FF Rl cod COIL PIICK A y COiACtS CONTCT PC NT OELY Lqh LIGHT PLITE Fuww act ol &I. FUSE PWEN SqUab SOLNI PLOW We* WIRE PG00 FIGURE 13-2. MARSEP Model of Simple Circuit' P Names assigned to elements in the sample used by the analyzer. The equations generated system and the events which they define, by the analyzer are not altered by the post- Special component properties and envi- processor.

The MARSEP r )gram also edits ronmental or outside factors can be included and applies set theory to the success and fail- 13-2, the effect of the human operator who For the system in Fig. 13-1, the MARSEP turns the system on and off is shown as program would perform an analysis of the ef- START with the corresponding P Names fects of shorts-to-ground and spurious electri- PLOS and QOFF. The effects of pressure cal connections (shorts) on the operation of and temperature, as well as enabling proce- the system. In the shorts-to-ground analysis it dures, also can be included, is assumed that components transmit a signal in the MARSEP model. For example, in Fig. ure expressions.

By use of the MARSEP modeling lan- that must be maintained at some level other guage, the element names, and the P Names, than the level associated with ground. All the MAP.SEP model is converted into a series ground terninals or possible connections to of statements which become the input to the ground are, therefore, examined to determine MARSEP program. Table 13-3 shows some if they can possibly nullify a useful signal in elements of the MARSEP modeling language. the system. Special messages are printed in The MARSEP program consists of three the program output which indicate when use- subprograms:

(1) the preprocessor, (2) the ful signals are nullified at their source by a analyzer, and (3) the postprocessor. The connection to ground. Shorts between termi- ystem to be analyzed is represented in the nals in the system are checked to determine if computer by lists of components and a list they can cause undesirable operation. The structure for each component and terminal, user can designate in his input statements The preprocessor accepts as input a descrip- where shorts are likely to occur, and the pro- gram also will search automatically for shorts. tion of the system which is converted into the required format for the analyzer.

Then, the Outputs prepared by MARSEP for the analyzer, written in Information Processing sample circuit are presented in Table 13-4. Language V (IPLV), generates the success and Two expressions are developed for system failure expressions for the system. The post- success. The first expression is for system suc- processor substitutes the external names pro- cess when the environment EHAND is applied vided in the input for the internal symbols in such a way that the ewitch is open. The 13-5