Downloaded from https://www.everyspec.com -M 706-1g7 . . IL U. IL IL WL U 0 M up W W W S A U. , 0 inc 'A oZ 0Ј~o ~ o CCa. 4K WO -1 4 C 4 W 49C RЈ Ј4 I- *> -- &-0-0A 5-o--o- FIGURE 6-17. Packaged Speed Reducer Dependency Diagram means that if repair is not allowed to take steady-state is achieved). The steady-state place on any of the items, the instantaneous availability is a constant and is not a function availability is equal to the reliability without of time.
Under the assumption of exponen- repair, because the only way the system could tially distributed times to failure and times to be up at the instant t under these circum- repair, the instantaneous availability mono- stances is for the system to be up at t = 0 and tonically decreases from a value of 1 to the remain up until t. The shape of the instanta- steady-state availability and hence the steady- neous availability curve depends on the types state availability under these circumstances is of failure and repair distributions the lowest well defined and can be found readily. level items are assuied to have. 5. Mean Time to Failure (MTF). The 4. Stead. -state Availability.
The MTF of a system is defined as the mean time steady-state ax ailability of a system is the to system failure. This definition is valid for asymptotic value of the instantaneous avail- nonrepairable systems and for repairable ability and is defined as the probability that systems. The MTF can be obtained by inte- the system is up at any givn point in time grating the reliability funct-on (without repair (but after a sufficiently long time so that or with repair) from 0 to -, assuming that the 6-22