Downloaded from https://www.everyspec.com AMCP 706-197 D , 02 + + FIGURE 6-22. Boolean Tree *(Ant 2 Vert Receive) Refer back to Fig. 6-18 for the final reliability * (Propagation Path 2) configuration. * (Ant 2 Hor Out) The relative ordering of equipment is not and need not be preserved in the reliability * (Ant 2 Vert Out) model. - (Combiner Gain 4) - (Dual Rcvr 4) 6-3.4.3 Reliability Models for Maintained (Front End 4) (Duplexer 2) Systems - (Dual Rcvr 3) require additional information above that derived from dependency diagrams and from (Front End 3) the basic reliability block diagram.
In practice KON2 = Y * Y2 * Y5 " Y*1 * Y12 L (and in theoretical work) the distinction - (Combiner Gain 3) Reliability models for maintained systems * T" V ' M U' W "X between redundancy and repair is often blurred. The names of some of the activities = (Ant 1 Hor Receive) are sometimes different, but the activities . (Ant 1 Vert Receive) themselves are very similar. We will use the (Propagation Path 1) term "replacement" to describe the activity of removing a nit that is presumed bad and S(Ant 1 Hor Out) inserting one that is presumed good. Whether (Ant 1 Vert Out) it is the same unit after being repaired, or a (Combiner Gain 2) different one, is irrelevant.
Two examples are - (Dual Rcvr 2) given. - (Front End 2) 6-3.4.3.1 Example No. 1 (Fig. 6-23) (Combiner Gain 1) All failure and replacement rates are con- - (Dual Rcvr 1) stant. Blocks B and C have two kinds of - (Front Erd 1) (Duplexer 1) spares, classified according to the ease of re- 6-32