EPSON — Print Info. Screen

Epson L-6034VW Operation Guide Touch Panel Basic Operations 110 Item Explanation Print Mode Select according to the type of substrate. When editing Print Info. that is set as the preset, the print mode cannot be changed. Paper #1 Select when the substrate is paper. Supported substrate: Paper (semi-gloss), uncoated paper, paper (cast) Film #1 Supported substrate: Foil paper, white film, clear film, metallized film Film #2 Suitable for substrate on which ink tends to spread more than for Film #1. Supported substrate: Foil paper, white film, clear film, metallized film Additional Printing Set when performing additional printing.

Do Not Apply (default) Prints without detecting the eye marks on the base. Apply Detects the base eye mark, and then prints so that the eye marks for the print data overlap. Eye Mark Horizontal Offset Set the distance between the right edge of the eye marks and the right edge of the print data as an offset of the horizontal direction when performing additional printing. Set the correction value within a range of -1000.0 to 500.0 mm (-39.370 to 19.685 inch). You can switch the units between inch and mm. Disabled when Additional Printing is set to Do Not Apply. Default: 0.0mm (0.00inch)