Epson L-6034VW Operation Guide Various Print Settings E Set the following, and then press OK . F Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. Print the first copy, and then the press automatically adjusts the sensor sensitivity. G If the first copy pauses on the unwinder side workbench, press Print to Fine-tune . Print the second copy, and then pause on the unwinder side workbench. H Check the print results and measure the eye mark pitch (a) from the right edge of the eye mark for the first copy to the right edge of the eye mark for the second copy using a ruler with a 0.1 mm scale.
I Calculate the adjustment value from the measured eye mark pitch (a) and the page length of the print data. The following shows the calculation method. Adjustment value = Value of measured eye mark pitch (a) - Page length of the print data J Enter the calculated adjustment value in Reverse Feeding Position Adjustment . K Press Print . L On the screen displayed, enter the number of copies, and then press Print . Start printing. This completes this section. 133 Item Value Copies 1 Perform Eye Mark Verification Printing Select