EPSON — Eye mark positioning area

Epson L-6034VW Operation Guide Various Print Settings Printing Over the Printed Substrate Base (Additional Printing) When eye marks are positioned in advance on the substrate on which the base is printed, the press can print over the printed data by detecting the eye marks. Positioning the Eye Marks Eye mark size/shape/color Create the eye marks you want to position as follows. Eye mark positioning area Position the eye marks on the right edge of the label design within the gray area shown below. It can be positioned on either the front or rear surface of the substrate. 134 Item Size Size Vertical printing direction: Between 5 and 10 mm Printing width direction:

5 mm or more Shape Square or rectangular Color Black, White The brightness of the mark must be sufficiently different from the base color of the substrate and the liner color for clear film See the following for more information on eye marks. U “Eye mark specifications” on page 248 Item Size a (print length) 30 to 1000mm (1.181 to 39.370inch) b (position of detectable eye marks) 80.0 to 340.4 mm (3.150 to 13.400 inch) * Differs depending on the width of the substrate loaded in the press.