EPSON — Settings and printing method for additional printing

Epson L-6034VW Operation Guide Various Print Settings Settings and printing method for additional printing 1 copy is printed when printing starts allowing you to check and fine tune the printing position as necessary so that the base layer to be printed together does not shift. A Set additional printing information in the Print Info. for a preset suitable to the type of substrate loaded, and set it as the default preset. Set the following items and create the preset. See the following for more information on creating presets and Print Info. U “Creating and Editing Preset” on page 114 U “Creating and Editing Print Info.” on page 117 c Important:

When Additional Printing is set to Apply for the print information, the preset for reverse feeding is disabled, but the reverse feeding function is enabled. Since eye marks for additional printing are used for reverse feeding the substrate, you do not need to allocate eye marks on the print data. B Check that the press switch is set to the Standby position. 135 Item Value Additional Printing Apply Eye Mark Horizontal Offset Set the distance from the right edge of the eye mark to the right edge of the print data. See the following when setting a value of more than 500.0 mm.

U “Settings when the Eye Mark Offset Exceeds 500 mm” on page 139 Eye Mark Pitch Enter the eye mark pitch for base printing Eye Mark Sensor Position Top or Bottom Preset for Reverse Feeding - (Unavailable)