Epson L-6034VW Operation Guide Various Print Settings B Set the color plate in the preset for reverse feeding, and set it as the default preset. C Load the substrate. U “Loading the Substrate” on page 32 D Return the adjustment volume on the ionizer to 0. E Check that the press switch is set to the Standby position. F Perform printing from the print application software, and then check that the print data was received on the touch panel. G Select the print job from the Job Management menu, and then press Print Settings . H Set the following, and then press OK . I Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing.
U “Adjusting the Print Position Using a Ruler” on page 132 steps 6 to 10 J Press Print . K On the screen displayed, enter the number of copies, and then press Print . Start printing the color plate. Next, print the white plate. Proceed to the next item. Necessary settings and procedures for white plate printing Follow the print procedure for color plate printing. 142 Item Value Reverse Feeding Apply Eye Mark for Reverse Feeding Use Distance from Top Edge of Substrate Apply to print data Distance from Right Edge of Print Job Apply to print data Reverse Feeding Position Adjustment 0mm Item Value Copies 1 Perform Eye Mark Verification Printing Select