EPSON — Necessary settings and procedures for white plate printing

Epson L-6034VW Operation Guide Various Print Settings K On the screen displayed, enter the number of copies, and then press Print . Start printing the color plate. Next, print the white plate. Proceed to the next item. Necessary settings and procedures for white plate printing Follow the print procedure for color plate printing. A Set additional printing for white plate in a preset suitable to the type of substrate loaded, and set it as the default preset. See the following for more information on creating presets and print information.

U “Creating and Editing Preset” on page 114 U “Creating and Editing Print Info.” on page 117 B Set the output to 2,000 W on the control panel of the corona treater. Note: When printing the white plate of reverse white printing, we recommend performing corona processing to reduce the outbreak of pinhole wrinkles. C Check that the press switch is set to the Standby position. D Perform printing from the print software, and then check that the print data for white plate was received on the touch panel. E Select the print job from the Job Management menu, and then press Print Settings .

146 Item Value Additional Printing Apply Eye Mark Horizontal Offset Set the distance from the right edge of the eye mark to the right edge of the print data. See the following when setting a value of more than 500.0 mm. U “Settings when the Eye Mark Offset Exceeds 500 mm” on page 139 Eye Mark Pitch Enter the print data width for color plate Eye Mark Sensor Position Top Corona Treatment Apply Lead In 0m Lead Out 0m Print Method For Reverse White Jobs White Plate Printing Rotate 180 Degrees Do Not Apply