EPSON — Necessary settings and procedures for color plate printing

Epson L-6034VW Operation Guide Various Print Settings See the following for more information on creating presets. U “Creating and Editing Preset” on page 114 B Set the color plate in the preset for reverse feeding, and set it as the default preset. C Load the substrate. U “Loading the Substrate” on page 32 D Return the adjustment volume on the ionizer to 0. E Check that the press switch is set to the Standby position. F Perform printing from the print application software, and then check that the print data was received on the touch panel. G Select the print job from the Job Management menu, and then press Print Settings . H Set the following, and then press OK .

I Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. U “Adjusting the Print Position Using a Ruler” on page 132 steps 6 to 10 J Press Print . 145 Item Value Lead In 17m Lead Out 0m Print Method For Reverse White Jobs Color Plate Printing Item Value Reverse Feeding Apply Eye Mark for Reverse Feeding Use Distance from Top Edge of Substrate Apply to print data Distance from Right Edge of Print Job Apply to print data Reverse Feeding Position Adjustment 0mm Item Value Copies 1 Perform Eye Mark Verification Printing Select