EPSON — Status during emergency stop

Epson L-6034VW Operation Guide Troubleshooting Stopping Press Operations in an Emergency Shutting Down the Press in an Emergency If you sense any danger while using the press, or if the substrate becomes jammed and so on, press the EMERGENCY STOP switch to stop the press immediately while printing. There are EMERGENCY STOP switches located at four positions on the press; the main panel on the main unit, the sub panel, the corona treater, and the additional UV lamp curing unit. Operations stop when one of the switches is pressed, and an error is displayed on the touch panel. c Important:

❏ When you stop printing by using the EMERGENCY STOP switch, it may have an adverse effect on the head, or you may need to perform recovery operations such as reloading the substrate and so on. Do not press the EMERGENCY STOP switch unless there is an emergency. U “After making an emergency stop” on page 219 ❏ If it is not an emergency, press the Pause switch to pause printing. U “Pausing Printing” on page 76 ❏ If smoke is detected, the press performs an emergency stop automatically. Status during emergency stop When an emergency stop is activated in the following statuses, the power supply is cut. Follow the steps in the next section to handle the emergency stop.

218 Press Parts Status Cover The cover can be opened. Feed substrate Immediately stops. Release the tension from the substrate so that the substrate can be removed.