EPSON — After making an emergency stop

Epson L-6034VW Operation Guide Troubleshooting After making an emergency stop If the press is stopped by an emergency stop or if the power is cut, follow the steps below to restart. A When performing an emergency stop using the EMERGENCY STOP switch, turn the EMERGENCY STOP switch that was pressed to activate an emergency stop in the direction indicated by the arrow, and then press Power Off on the touch panel error screen. B If the covers are open, close them, and then set the switch on the press to P . When the UPS light turns off, wait for at least 10 seconds. 219 Press Parts Status Carriage unit Immediately stops.

Be careful when opening the covers as the stop position of the carriage unit differs according to the circumstances when the press was stopped. Do not touch the light shield or the carriage. Emitting UV Immediately stops. Ink that has not been cured remains in the area where printing is complete. Mechanical configuration (sensor types, fans, and so on) Immediately stops. Corona treater Immediately stops. Additional UV lamp curing unit Immediately stops. The shutter is opened.