EPSON — Print quality declines due to ink distribution

Epson L-6034VW Operation Guide FAQ Print quality declines due to ink distribution A. You can improve the quality of ink distribution using the print mode setting items for the preset and by adjusting corona treatment. The print mode and the corona treatment settings affect how the ink is spread. ❏ Print Mode Select a print mode that matches the substrate. When using substrate that has already been checked, copy and use the preset that matches the recommended print mode. When using new substrate, make a test print and check the print outs while referring to the following table to select the appropriate print mode.

❏ Corona Treatment When Corona Treatment is set, press the UP / DOWN switches to adjust the output of the corona treater within a range of 100 to 2,000 W while making test prints and checking the print outs. When using the reverse feeding function to perform reverse feed of the substrate after pausing, depending on the number of times printing is paused, there may be differences in the quality of ink distribution due to the number of times corona treatment is performed for the same section. Make the following settings in the preset, and check the print results.

Check the print results when paused, and if you are concerned about the difference in the quality of ink distribution, try the following. ❏ Do not use the reverse feeding function ❏ Do not perform Corona Treatment , and use substrate for which corona treatment is complete. 235 Substrate Recommended print mode Paper (semi-gloss) Uncoated paper Paper (cast) Paper #1 Foil paper White film Clear film Metallized film Film #1 or Film #2 Film #2 is suitable for substrate on which ink tends to spread more than on Film #1. Item Value Pause (After Print) Apply Stop Position After Print Rewinder Side Workbench Reverse Feeding Apply Eye Mark for Reverse Feeding Do Not Use