EPSON — When performing additional printing, the print position gradually shifts

Epson L-6034VW Operation Guide FAQ A Press the Pause switch on the press to pause printing, and then cancel the job. B Check the current drum temperature on the Operation Status screen. C Check the print results, and then measure the amount of print position shift for additional printing on the base. When the label design for additional printing shifts to the left of the base, this is a negative value. a: Substrate feed direction b: Amount of gap to measure D Calculate the amount of adjustment from the checked drum temperature and the measured amount of shift in the print position. The following shows the calculation method.

Correction value = amount of shift in the print position / (checked drum temperature [˚C] −25) 239