Epson L-6034VW Operation Guide FAQ Print data When Telescoping Occurs in the Substrate A. When unwinding or rewinding substrate with a tension that is not suitable to that substrate, telescoping may occur. "Telescoping" is the term used to describe what happens when the center of a substrate roll projects out creating a shape similar to a bamboo shoot. When you select Substrate Type , the standard tension value is applied; see the following tables to change the tension value if any problems occur. Changing the tension value ❏ When replacing the substrate Change the tension setting in the Substrate Settings menu - Change Substrate step 2.
❏ After changing the substrate Change the tension setting in the Substrate Settings menu - Change settings screen. When performing additional printing, the print position gradually shifts A. When using substrate that easily expands or contracts, the print position gradually shifts as the drum temperature rises. Adjust Align eye mark temp correction factor. Adjust the eye mark alignment temperature correction factor using the drum temperature (˚C) and the amount of shift (mm) in the print position. 238 Point where telescoping occurs What to do Unwinder roll side Lower the tension value for unwinding by 0.7 times the standard value. * Film that is 250 mm or wider wrinkles easily.
We recommend setting 15 N or more. Rewinder roll side When telescoping of 10 mm or more occurs, lower the tension value for rewinding by 0.7 times the standard value. When removing wound up roll substrate ❏ Increase the tension value for rewinding by 1.3 times the standard value. ❏ Since telescoping occurs easily in film that is 120 mm or narrower, be careful when removing from the rewinder axis.