Epson L-6034VW Operation Guide FAQ How do I print label designs with a pitch (interval) of less than 30 mm? A. Arrange the label design so that the print length of one page is 30 mm or more. Also, if you need eye marks for each label design, make sure they are arranged separately from the eye marks for the press. This press can print lengths of 30 to 1,000 mm on one page. When printing a label design with a pitch (interval) of less than 30 mm, or when there are multiple label designs in the print data, make sure the print length of one page is 30 mm or more.
Example) When the pitch interval between label designs is 10 mm Label design Print data When eye marks are necessary for the label designs The smallest eye mark pitch for which you can use additional printing and the reverse feeding function on this press is 30 mm. When you need to use an eye mark pitch (interval) that is less than 30 mm, make sure they are arranged separately from the eye marks for the press.
When you need a pitch interval of 10 mm for eye marks for post processing devices ❏ Arrange one eye mark for the press at the top of the print data (pitch interval 30 mm) ❏ Arrange eye marks for the post processing device for each label design (pitch interval 10 mm) 237 Substrate width Minimum eye mark pitch 200 mm or more 30 mm 150 mm or more, less than 200 mm 50 mm 120 mm or more, less than 150 mm 90 mm Less than 120 mm 150 mm