EPSON — Substrate Specifications

Epson L-6034VW Operation Guide Appendix Substrate Specifications 246 Main Press Unit, Additional UV Lamp Curing Unit, Corona Treater Temperature and humidity Recommended environment when printing Temperature: 20 to 28˚C Humidity: RH 35 to 55% without condensation Recommended environment when stopped (at night and so on) Temp: Right figure Humidity: Right figure Recommended environment when stopped (at night and so on) Recommended environment when printing * Without condensation Altitudes Altitudes 2000 m or lower Noise During print operations:

80 dB or less Substrate type Adhesive paper (including clear liner), non-adhesive paper For adhesive paper and non-adhesive paper, check the paper first before use.

Substrate width 80 to 340 mm Substrate thickness 80 to 320 μm Maximum roll mass 100 kg Maximum roll diameter 600 mm Maximum roll length 1,000 m Internal core diameter 3 inch (-40/1000" +80/1000") 76.2 mm (-1 mm +2 mm) Paper core thickness 3 to 20 mm We recommend 5 mm or more to prevent the paper core from being crushed Paper core material Paper Distance from paper core to roll edge Within ± 10 mm Status inside paper core No scratches, dents, paper peeling off, soiling, and nothing stuck to the paper core such as paper powder Spliced paper cores You cannot use spliced paper cores. Amount of telescoping Within 20 mm