Epson L-6034VW Operation Guide Appendix Substrate splicing specifications Specifications when there is a splice in the roll. Splicing tape Splice section 247 Substrate feed width range variation ± 1 mm Flatness No creases or folds Splicing Tested tape thickness: 25 μm (both sides) Do not overlap the substrate at the splice. Tensile strength At least 1,750 N/m Type Tape Width 20 mm or more Thickness 0.025 mm or more Color Red Splicing method No overlapping substrate Sticking method Tape covers to the edges of the substrate * 5 mm from the edge of the substrate is the splice detection area.
When including the shift in position of the splice, if 1.5 mm or more is covered in tape from the edge of the substrate to 5 mm from the edge, the splice can be detected. Sticking angle Within ± 30 degrees, perpendicular from the edge