Epson L-6034VW Operation Guide Preparing to Print and Printing Note: When Additional Printing for print information is set to Apply , the preset setting for reverse feeding is disabled when you want to use the eye marks for additional printing on the substrate for reverse feeding. D Check that the press switch is set to the Standby position. E Perform printing from the print application software, and then check that the print data was received on the touch panel. U “Operation Status” on page 89 "Next Job Info." See the following for more information on each icon displayed in next job info.
When other jobs have already been received, or when Operation when Receiving is set to Pause in Print Job Reception Settings , it is not displayed in the next job info. In this case, check the Job Management screen. U “Job Management” on page 120 Waiting or Pause screens F Before you start printing, check the print job content on the touch panel. 71