EPSON — Start Printing

Epson L-6034VW Operation Guide Preparing to Print and Printing Note: ❏ When changing a preset, edit the preset and print information, and change the default preset from the Preset Management menu. Next, select a print job on the Job Management screen, and then press Apply Preset . If images need to be processed again, it may take some time before printing starts. U “When do I need to re-process images for print data?” on page 228 ❏ When print jobs are grouped, you can print continuously on the same substrate without leaving gaps. See the following for more details. U “Group Print” on page 154 G If necessary, press Print Settings from the Job Management menu.

You can change the preset and number of copies. When Perform Eye Mark Verification Printing is selected and reverse feeding is performed using eye marks, one copy is printed when printing starts, and the sensitivity of the eye mark sensor is adjusted automatically. When performing additional printing and Perform Eye Mark Verification Printing is selected, 1 copy is printed when printing starts, and you can check and fine tune the printing position. U “Print Settings/Reprint Settings Screens” on page 122 H Move the press switch from Standby to Ready . An information sound chimes, and then printing starts. 72