EPSON — Start Printing

Epson L-6034VW Operation Guide Preparing to Print and Printing Also, the Paused screen is displayed in the following situations. After checking the settings and so on, press the Start switch to start printing. ❏ When Pause (Before Print) is set to Apply in the preset. ❏ When Print Info. (eye mark for additional printing, Eye Mark Horizontal Offset, Eye Mark Pitch, and Eye Mark Sensor Position) settings do not match the loaded substrate. Note: ❏ When Operation when Receiving is set to Pause in Print Job Reception Settings from press settings, printing does not start.

When printing, press Print on the Pause tab from the Job Management screen to change the job to Waiting, and then change the switch on the press to Ready . ❏ When a message prompting you to clean the nozzle surface of the head is displayed, perform cleaning using the time to cleaning displayed in the message area at the top-right of the touch panel as a guide. If ink accumulates on the nozzle surface of the head, it may adversely affect the print finishing. Additionally, the time to cleaning decreases as the cumulative printing time increases. However, this does not include the time when head maintenance is performed during printing. I When Using the Ionizer is set to Yes in Print Info.

for Preset , adjust the ion balance. (1) Check that the ionizer is set to on from the Operation Status screen. 73