EPSON — Summary, p. 5

Summary Contents Application This document applies to the Web API used between Seiko Epson projectors and external control devices. This outlines the URI format of the Web API and the corresponding operation. Type of Web API Content Playback This is the Web API for controlling the content playback function, which operates only when the content playback function is turned on. The URI Path is: /api/v**/contentmgr For supported models, see the List of Supported Models page. For controlling projector This is the Web API for controlling the projector itself. The ESC/VP21 commands are used as the parameters. For details on the ESC/VP21 commands, see the "ESC/VP21 Commands User's Guide".

The URI Path is: /api/v**/control/escvp21 For supported models, see the List of Supported Models page. Operating Conditions Content Playback Web API You can use the content playback Web API when the following three conditions are met. 1. The Web API is On Setting type: Network Settings Turn on the Web API from the projector's [Network Settings] menu. For the details, see the User's Guide for the model you are using. Setting type: Developer's Menu Open the [Developer's Menu] (see below) in your web browser, and then set Enable API to On. The setting type varies depending on your projector model. See the List of Supported Models page. 2.

The projector is on or in standby mode and ready to communicate The following are the standby modes in which communication is possible. The Standby Mode is set to Communication On, and communication is being performed with the specified communication port (wireless LAN/wired LAN). 3. Content Playback is set to On Turn on Content Playback from the projector's [Settings] menu. Projector Control Web API You can use the Projector Control Web API when the following two conditions are met. 1. The Web API is On Turn on the Web API from the projector's [Network Settings] menu. For the details, see the User’s Guide for the model you are using. 2.