Summary Contents You can enable Digest authentication for all Web APIs. Enable API Authentication Setting type: Network Settings Turn on the API authentication from the projector's [Network Settings] menu. For the details, see the User’s Guide for the model you are using. Setting type: Developer's Menu Open the [Developer's Menu] (see below) in your web browser, and then set API Authentication to On. The setting type varies depending on your projector model. See the List of Supported Models page.
Authentication Information Username Password Digest authentication EPSONWEB Epson Web Control Password Content-Type Request Content-Type:application/json However, if the API has a Content-Type specification, that should be used. Response Content-Type:application/json However, if the API has a Content-Type specification, that should be used. Developer's Menu When Content Playback is On, you can access the [Developer’s Menu] by opening the following URL in a web browser. http:// /lighting/developer-menu Where is the projector's IP address. Example: When the projector’s IP address is 192.168.88.1.
http://192.168.88.1/lighting/developer-menu You can check the projector’s IP address from the [Network settings] menu. © 2024 Seiko Epson Corporation Page 6/42