EPSON — Error Indicators

User’s Guide Error Indicators 92 Light Situation Solution Paper is ejected as it is too far inside the rear paper feed slot. Load paper correctly in the rear paper feed slot, and then press the button. & “Into the rear paper feed slot” on page 28 No CD/DVD is loaded, or an unsupported CD/DVD is loaded. Load a CD/DVD correctly, and then press the button. & “Loading a CD/DVD” on page 31 A paper jam has occurred. Remove the jammed paper, and then press the button. & “Paper Jams” on page 97 The paper size you loaded differs from the paper size selected in the print settings. Load the correct size of paper in the printer, and then press the button.

An ink cartridge is expended or there is insufficient ink in the cartridge to charge the ink. Replace with a new ink cartridge. & “Replacing an ink cartridge” on page 71 An ink cartridge is not installed. The ink cartridge is not recognized, even when you install a new ink cartridge. Install the ink cartridge again. An ink cartridge is nearly expended. You can print until the H light turns on. Prepare a new ink cartridge. You can check the ink levels from the computer. & “Checking the Ink Cartridge Status” on page 66 See the following to replace the ink cartridge right now. & “Replacing an ink cartridge” on page 71 Print data has been sent from unsupported printer driver.

Press the y button to stop printing. The light and H light flash alternately. An ink pad is nearing or at the end of their service life. The ink pad needs to be replaced. Contact Epson or an authorized Epson service provider to replace the ink pad*. It is not a user-serviceable part. When a message saying that you can continue printing is displayed on the computer, press the y button to continue printing. The error indicator lights stop flashing for the time being, however, they will continue to flash at regular intervals until the ink pad is replaced. & “Contacting Epson Support” on page 117