Network Guide Appendix Ports and Protocols EpsonNet Print (for Windows Only) This is Epson's original printing port. EpsonNet Print is set to the print port when you set up your printer using the software disc supplied or using the software downloaded from the website. EpsonNet Print is also set to the print port when you install the printer driver. ❏ You do not need to reset the printer's network settings even if the printer's IP address is changed by the DHCP function on a server or router. ❏ You can use printers in a different network segment over the router. ❏ The printer's status is displayed at the top of the Windows spooler screen.
Standard TCP/IP This is a communication protocol pre-installed on a computer. ❏ You need to reset the printer's network settings when the printer's IP address is changed by the DHCP function on a server or router. ❏ You can use printers in a different network segment over the router. ❏ You can acquire a print log from Event Viewer . Bonjour (for Mac OS X Only) This is a protocol used in Mac OS X. You do not need to reset the printer's network settings when the printer's IP address is changed by the DHCP function on a server or router. To add printers from Bonjour, enter the product's model number on the following website. Go to Support and follow the on-screen instructions to add printers.
http://epson.sn > Additional Software WSD (for Windows Only) WSD (Web Services on Devices) is a communication protocol pre-installed on computers running Windows Vista or later. 93 Ethernet Wi-Fi Simple AP Mode Wi-Fi Direct Mode Ad Hoc Mode USB Ethernet – – ✓ – – ✓ Wi-Fi – – ✓ – – ✓ Simple AP Mode ✓ ✓ – – – ✓ Wi-Fi Direct Mode – – – – – ✓ Ad Hoc Mode – – – – – ✓ USB ✓ ✓ ✓ ✓ ✓ –