Network Guide Appendix ❏ You do not need to reset the printer's network settings when the printer's IP address is changed by the DHCP function on a server or router. ❏ You can use printers in a different network segment over the router. Note: The WSD port is automatically set up if your computer's operating system is later than Windows 8. If you set up the WSD port without installing the Epson printer driver, your computer's standard driver is set up instead. In that case, we recommend installing the Epson printer driver separately. Access the following website, then enter the product's model number.
http://epson.sn After installing, change the printer driver from the printer's property screen under Devices and Printers. When printing using WSD, select the printer on the network. Related Information & “Setting Up Standard TCP/IP Ports – Windows” on page 94 & “Setting Up a WSD Port – Windows” on page 96 Setting Up Standard TCP/IP Ports – Windows 1. Open the devices and printers screen. ❏ Windows 8.1/Windows 8 Desktop > Settings > Control Panel > Hardware and Sound or Hardware > Devices and Printers . ❏ Windows 7 ❏ Windows Vista Click start > Control Panel > Hardware and Sound (or Hardware ) > Devices and Printers . Click start > Control Panel > Hardware and Sound > Printers .
❏ Windows XP Click start > Control Panel > Printers and Other Hardware > Printers and Faxes . 2. Add a printer. ❏ Windows 8.1/Windows 8 Click Add printer , and then select The printer that I want isn't listed . ❏ Windows 7 Click Add printer . ❏ Windows Vista ❏ Windows XP Click Install Printer . Click Install Printer , and then click Next . 3. Add a local printer. ❏ Windows 8.1/Windows 8 Select Add a local printer or network printer with manual settings , and then click Next . ❏ Windows 7/Windows Vista Click Add a local printer . 94