User's Guide Basic Scanning Sending Invoice or Receipt Data to an Accounting Service You can send scanned invoices or receipts to the following accounting services: ❏ QuickBooks Online Available accounting services are subject to change without notice. This section explains the basic steps for scanning and sending invoices or receipts to an accounting service. See the Epson ScanSmart help for details on how to use the application. 1. Load the invoices or receipts in your scanner. 2. Press the button on the scanner. The originals start scanning and Epson ScanSmart opens. 55 Type of Original Required Settings Envelopes Select Of fin Detect Double Feed.
Plastic cards Select Plastic Card on the Document Size list, or select Off in Detect Double Feed. Carrier Sheet ❏ If you select Auto Detect from the Document Size list, paper skew in the original is automatically corrected even if you select Off in Correct Document Skew. ❏ If you select a other size than Auto Detect from the Document Size list, you can only use Contents Skew when using Correct Document Skew. Paper Skew is not applied when this is selected. When you select Paper and Contents Skew, only contents skew is corrected. Large size originals If the size of the original you want to scan is not on the Document Size list, select Customize to open the Document Size window.
Next, create the size manually on the window. Long paper If the size is not listed on the Document Size list, select Auto Detect (Long Paper) or select Customize to create a custom document size. Laminated cards To scan transparent areas around the edges, select Settings on the Document Size list to open the Document Size Settings window. Next, select Scan laminated card in the window. Note: The appropriate effect may not be achieved depending on the original. If transparent areas around the edges are not scanned, select Customize from the Document Size list, and then create the size manually.