^GS [Name] Special font [Format] ^GS o ,h ,w [Function] Sets a symbol mark to the field. A symbol mark can be rendered by executing this command. To render the symbol, execute “^FD” or “^FV” in the same field. If the field data for “^FD” or “^FV” includes a symbol mark identifier in the following table, that symbol mark is rendered. Sets the field orientation based on Parameter o. Set a multiple of the symbol mark’s standard height for Parameter h. Set a multiple of the symbol mark’s standard width for Parameter w. [Response] None [Reference] Related commands: ^FW , ^CF , ^FD , ^FV ESC/Label Command Reference Guide Rev.
L Page 132 Parameters Description Definition range o Field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) h Character height [dot] 0 ≤ h ≤ 9999 w Character width [dot] 0 ≤ w ≤ 9999 Symbol mark identifier Symbol mark A Registered trademark mark B Copyright mark C Trademark mark D Underwriters Laboratories validation mark E Canadian Standard Association validation mark