1.4.4 Saving a File for a Label Format Use “^DF”(Download label format) to save a label format. If designating a different value for each label, designate the “^FN”(Field number) in the field. (4) “^FO”(Field position setting) “^B1”(Barcode designation) “^FN”(Field number)”^FS”(Field end) (5) “^XZ”(End label format) Save Figure1.4.4 Example of a Command to Save a Label Format File The printer operates as follows. In (2), the host orders the printer to save the label format with the designated file name. In (5), the command group written between “^XA”(Begin label format) and “^XZ”(End label format) is saved in the memory area of the printer as “SAMPLE.FMT”.
ESC/Label Command Reference Guide Rev. L Page 16 Command Printer p after this MPLE.FMT. ng ecification and d. SAMPLE.FMT Ex: The comman command is save d grou d as SA p after this MPLE.FMT. (2) “^DF”(Download label format) Ex: “ABC” in the field d ata setti ng (3) “^FO”(Field position setting) “^A”(Font designation) “^FD”(Field data setting) “^FS”(Field end) Ex: The field is the bar number 1 is applied to code sp this fiel ecification and d.