1.4.5 Printing Using the Label Format File If printing using the saved label format file, first call the command group in the label format by using . Next, set the field data that will be the difference and perform printing. Printer SAMPLE.FMT ABC ||||||||| 001 Figure 1.4.5 Example of Print Command Using the Label Format File The printer operates as follows. SAMPLE.FMT is called by the “^XF”(Call the command file) in (2). “ABC” is rendered. The barcode is designated in a field and the field number 1 is allocated. The field for number 1 in (3) is barcode designation, so it is converted into a barcode and rendered. In (4), the contents of the rendering area are printed.
ESC/Label Command Reference Guide Rev. L Page 17 Command (1) “^XA”(Begin label format) Ex: Call SAMPLE. FMT (2) “^XF”(Call label format ) Load the contents o Ex: “001” for the field data settin (3) “^FN”(Field number) “^FD”(Field data setting) “^FS”(Field end) Re (4) “^XZ”(End label format) Print Load the contents o f SAMPLE. Ex: “001” for the field data settin g in numb er 1 Re nder the b