4.4.2 Buzzer setting Function description: Use this function to sound the buzzer on the printer at the timing after printing that is specified by the user. The following timings are recommended for sounding the buzzer. Table 4.4.2-1 List of buzzer timings Usage case: Use this function to sound a buzzer when the number of units specified by the user have been printed. Command(s) used: ^S(CUB,S 4.4.3 Printer pause setting Function description: Use this function to pause the printer at the timing after printing that is specified by the user. The following timings are recommended for pausing the printer. Table 4.4.3-1 List of printer pause timings Usage case:
Use when the user must perform some action after printing, such as checking the printed media or removing paper that has been cut. Command(s) used: ^PQ Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 28 Item Description Do not sound The buzzer is not sounded after printing. After printing last label The buzzer is sounded after the last label of a batch is printed. Item Description Do not pause The printer does not pause after printing. After cutting The printer is paused in connection with the cut setting. Each specified label The printer is paused after each user-specified number of labels.
After printing last label The printer is paused after the last label of a batch is printed.