4.5 Image quality setting The degree of the effect of the settings described in this chapter may vary depending on the media that is used. It is recommended to inform the user to check the results of the print settings on the media that will actually be used. 4.5.1 Ink profile level correction value setting Function description: Use this function to set the correction value for the standard ink profile level. When this setting is changed, the ink profile amount (volume of ink used) changes. Using the default setting as the standard, you can set 3 grades toward light and 10 grades toward dark (for a total of 14 grades). Default setting:
0 Figure 4.5.1-1 Ink profile amount Usage case: Use to reduce or increase the volume of ink used according to the media coating type and the content that is printed. Implementation recommendations: When the ink profile level is changed, the barcode scanning quality may drop. In addition, if the grade is changed toward dark, print quality may reduce in regard to bleeding, transfer, abrasion resistance, and water resistance. Inform the user of the risk of reduced barcode scanning quality and reduced image quality if the ink profile level is changed. Command(s) used: ^S(CPC,D Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 29