EPSON — 4.5.2 Black ratio correction value setting

4.5.2 Black ratio correction value setting  Function description:  Use this function to set the correction value for the ink ratio that makes up the color black.  If this setting value is changed, the ratio of ink that is used when printing black will change.  Using the default setting as the standard, you can set 6 grades for a lower ratio of black ink. Default setting: 0 Figure 4.5.2-1 Black ratio correction  Usage case:  Lower the blank ink ratio when you check the printed media and find that the ink can easily peel off. Depending on the quality of the media, black ink can easily peel off when printing with the default black ratio correction value. If this occurs, correct the value.

 Implementation recommendations:  When the black ratio correction value is changed, the barcode scanning quality may drop and there is a risk of a reduction in black density. Inform the user of the risk of reduced barcode scanning quality and reduced image quality if the black ratio correction value is changed.  When the media coating type is changed, return the black ratio correction value to the default setting.  Command(s) used:  ^S(CPC,P Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 30