4.5.4 Manual color correction setting Function description: Use this function to set more detailed color correction. The printer corrects the colors of an image based on the setting values. Manual color correction is not performed if the type of color correction is set to ICM or None. Table 4.5.4-1 Correction content Usage case: Use if the application that was used to create the image has no color correction function. Implementation recommendations: Manual color correction is possible only if the type of color correction is set to Epson preferred color, Epson standard color, or Epson vivid color.
The printer control software displays the settings window for manual color correction and allows the values to be changed only when the type of color correction is set to Epson preferred color, Epson standard color, or Epson vivid color. When the type of color correction is set to ICM or no color correction, either the settings window for manual color correction is not displayed or the values cannot be changed.
Table 4.5.4-2 Types of color correction and manual color correction If the user changes the type of color correction from a type that supports manual color correction to a type that does not support it, the printer control software stores the settings for manual color correction so that they can be displayed again the next time the supporting type is selected. Command(s) used: ^S(CPC,R ^S(CPC,A ^S(CPC,O ^S(CPC,N ^S(CPC,M ^S(CPC,L Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 32 Item Description Brightness Adjust the brightness of the entire image. Saturation Adjust the vividness of the image.
Contrast Adjust the difference between the light and dark areas of the image. Tone (cyan) Adjust the strength of red and cyan. Tone (magenta) Adjust the strength of green and magenta. Tone (yellow) Adjust the strength of blue and yellow. Type of color correction Manual color correction Epson preferred color Epson standard color Epson vivid color ICM N/A None N/A