EPSON — 4.5.7 Spot color adjustment setting

4.5.5 Banding reduction setting  Function description:  Use this function to set the correction value for reducing vertical banded color irregularities that occur in the print result.  Using the default setting as the standard, you can set 3 grades toward light and 7 grades toward dark (for a total of 11 grades). Default setting: 0  Usage case:  If there are banded color irregularities darker than the surrounding area due to the media coating type being used, set this towards light.  If there are banded color irregularities lighter than the surrounding area, set this towards dark.  Command(s) used:  ^S(CPC,B 4.5.6 Edge correction setting  Function description:

 Use this function to reduce the problem of visible gaps between background and black text due to misalignment of ink droplets between ink colors.  You can set it to enabled or disabled. Default setting: Disabled  Enable correction to increase the ink profile for the edge part and thicken the lines.  Usage case:  Set to enabled if there is a noticeable gap created between background and text due to the print content.  Command(s) used:  ^S(CPC,F Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 34