EPSON — 4.5.7 Spot color adjustment setting

 Usage case:  Use this function for components that you particularly want to print with an appropriate color, such as logos or other symbols.  Implementation recommendations:  When printing with spot color adjustments, the printer control software should display a note that recommending that the user use the same image quality setting as when creating a spot color list file. If the image quality settings are different, the color designated as the spot color may not be reproduced correctly. The related image quality settings are as follows:

 Ink profile level correction value setting  Black ratio correction value setting  Color correction type setting  Manual color correction setting  The printer control software should display a note recommending that users not use spot color adjustments with ICM. That is because the color specified as a spot color may change in ICM.  Command(s) used:  ~DY ^ID ^S(CPC,I The items and UI samples that the user sets when printing are shown below. Table 4.5.7-1 User setting items Figure 4.5.7-3 UI sample for applying a spot color list file Epson ESC/Label Application Development Guide CW-C8000 Series Rev.

B Page 36 Item Description Not apply Choose this when not applying spot color adjustment with this print. Apply Choose this when applying spot color adjustment with this print. Spot color list file name (Open file) From the spot color list files that the user saved on the computer with the EPSON tool in advance, specify the one to this printing.  The default folder displayed in the dialog when selecting a spot color list file is shown below. This is also the default location where the EPSON tool saves the file.  We recommend a user interface that allows users to easily specify the information that was previously specified.

[Public documents]\EPSON\SpotColorData\CW-C8000 Series * [Public document] is a path that can be obtained by specifying CSIDL COMMON DOCUMENTS in Windows API, etc. _ _