Nio — Alcohol Interlock

Vehicle Safety Alcohol Interlock The purpose of alcohol interlocks is to enhance traffic safety by preventing anyone with alcohol concentration exceeding a set limit value from driving a motor vehicle. Before you install the interlock, the following safety risks should be considered: • With your vehicle in the P gear position, turn off the high voltage power supply (to cut off the high voltage circuit, disconnect the emergency high voltage cutoff plug located under the hood near the coolant reservoir, and then disconnect the cable connected to the negative terminal of the 12 V battery). • The alcohol interlock installer is responsible for the safe installation.

The alcohol interlock electrical plug is located below the right front seat. The alcohol interlock is connected as follows: 1. Move the right seat to its foremost position. 2. Lift the carpet and the alcohol interlock cover and take out the electrical plug of the alcohol interlock. 3. Connect the alcohol interlock electrical plug and the alcohol interlock handset. 4. Mount the alcohol interlock handset and the alcohol interlock control unit under the console box. 212