Vehicle Safety Note After installing the alcohol interlock, no visual or audible indication will be given from the vehicle, but the alcohol interlock handset will show the operation instructions. The alcohol interlock connection schematics are as follows: 213 Function Cable or pin Position of connection 1 Battery feed (KL30), uninter- rupted For nominal 12 V, the following is required for the alcohol interlock:
Gray Cable Pin 1 0.5 mm² In Instrument Electrical Center box under front passenger foot pedal 2 Ground Black Cable Pin 2 0.5 mm² Under driver's seat for left-hand drive and under front passenger's seat for right-hand drive 3c Data bus connec- tion Connection to an internal data bus of the vehicle for data exchange between the vehicle and the alcohol interlock. White-red Cable Pin 4 0.35mm² Under driver's seat for right-hand drive and under front passenger's seat for left-hand drive