Nio — Blind Spot Detection (BSD) and Lane Change Assist (LCA)

Vehicle Safety Assist Blind Spot Detection (BSD) and Lane Change Assist (LCA) The Blind Spot Detection (BSD) and Lane Change Assist (LCA) will remind you to pay attention to lane change safety through visual, auditory and tactile alarms when there are other vehicles in the blind spot of your vehicle or other vehicles approaching quickly in the blind spot. The Blind Spot Detection (BSD) and Lane Change Assist (LCA) will only be activated when the speed of your vehicle is about 15 km/h or more. Caution This feature is able to detect the lanes next to the vehicle and more than 70 meters from the rear.

Go to the Settings page from the control bar at the bottom of the central display, and tap NIO Pilot >Blind Spot Detection (BSD) and Lane Change Assist (LCA) to enable or disable this function and select an appropriate means of reminding you. When the function is enabled and activated, the dynamic environment simulation display will remind you that there is a vehicle approaching from behind as shown in the figure. 250