Nio — Blind Spot Detection (BSD) and Lane Change Assist (LCA)

Vehicle Safety Assist When a vehicle in the driver's blind spot and a vehicle approaching rapidly from behind are detected, a marker saying that there is a vehicle on the side will be displayed on the rear view mirror. If you turn on the turning signal on the corresponding side in this case, it will remind you not to change lanes with the following warnings:

• Marker light on the rear view mirror • Sound + Marker light on the rear view mirror flashes • Steering wheel vibrates + Marker light on the rear view mirror flashes • Sound + Steering wheel vibrates + Marker light on the rear view mirror flashes Caution The chime may not be heard if the environmental noise is too loud, such as when the audio system is played at high volumes or the surrounding environment is too noisy. In a bright environment such as daytime, the warning of the red ambient lighting may not be easily noticeable. Caution Blind Spot Detection and Lane Change Assist do not work when the vehicle is in REVERSE.

Caution The dynamic environment simulation display can only be used as a reference and cannot perfectly reflect the real traffic conditions. Therefore, do not rely on the dynamic environment simulation display. Caution When you drive on a road with sharp curves, wide lanes or an uneven surface, Blind Spot Detection and Lane Change Assist may not be able to warn you about vehicles in adjacent lanes. Blind Spot Detection and Lane Change Assist may give false warnings in the following situations: • Driving near protective fences • Driving on/under a bridge, or through a tunnel 251