CHASSIS MODIFICATIONS 2-94 E URO C ARGO E URO 4 - 5 2.31 Chocks Usually these are fi tted directly at the factory. Should this not be the case, or if it is necessary to change their original position, the Bodybuilder must work out a new arrangement in compliance with local regulations. The new position must ensure reliability and safety a s well as easy access for operation by the user. Side guards Base - July 2006 Revi - June 2007 Print 603.93.431 re 2.43 (*) Either the bottom part of the auxiliary frame is over 1,300 mm from the ground or the width of the auxiliary subframe is less than the external space occupied by the tyres.
Section A-B Detail “X” Test load 1 kN Permitted sag values under test load: ≤ 30 mm on the rear, included in the last 250 mm of the device ≤ 150 mm on the remaining parts of the device Supporting structure for the combined fastening of the side guard and rear mudguard. Supporting structure for the combined fastening of the side guard and rear mudguard. 91515 91515