Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-55 E URO C ARGO E URO 4 - 5 3.17 Winch Installation The winch installation on the vehicle should be positioned on one of the following points: - On frame front end (front installation) - On vehicle frame, behind the cab - Between vehicle frame side member, centred or displaced on one side. - On the end of the frame. The installation should be performed so as not to interfere with operation of units and components of the vehicle, with respect to max. load limits allowed on axles and following the company directions.

Fixing of the winch unit and the relevant drive components should conform to directions given at point 2.3, ensuring that the reinforced areas are not locally limited to the mounting area (see point 2.22) taking into consideration the rope operations and in particular, its transverse component when the pullingaction isrunning obliquely. For the installation of the winch behind the cab a proper subframe must be designed to have dimensions and structure (stiffening cross member and braces) conforming to winch capacity.

We suggest choosing those equipped with hydraulic systems that can be operated through the hydraulic pumps already used for equipment previously installed on the vehicle (tiltable cargo body, crane etc.). Should mechanical winches be mounted, the drive transmission will conform to the indications given at point 4. For worm screw type winches, the power take-off system arrangement should take into account the low performance of such a drive system. Electrical winches should be used for low power requirements and for short periods of use because of the limited capacities of battery and alternator. Any safety regulations must be strictly followed.

Print 603.93.431 Base - July 2006 Revi - June 2007