Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

SPECIFIC INFORMATION AND INSTRUCTIONS 5-15 E URO C ARGO E URO 4 - 5 5.3 Installing Anti-theft device When installing anti-theft devices you must observe the following precautions and instructions. Type of anti-theft device: IVECO recommends you use products that comply with the requirements requested and approved by recognized bodies such as ANIA, TЬV, UTAC, MIRRC (Thatcham), etc. Likewise, follow the instructions given in the Specifications issued by specialized Quality Institutions (e.g. IMQ) at the request of Insurance Companies. They provide information, requirements, performance of components and systems, as well as conformity criteria.

Installation The control devices must be positioned so they will not accidentally trigger while the vehicle is travelling so as to avoid the hazard of it suddenly stopping. If additional circuit breakers are installed to stop the vehicle from starting, in order to prevent them accidentally triggering while the vehicle is travelling (with the above-mentioned consequences), it is recommended to: − Use suitable components to withstand vibration, changes in temperature, etc. − Make the installation in areas protected against accidental bumps caused by persons and/or property.

Installation must be made in compliance with IVECO instructions as regards the system (see point 2.21) and the place of use (e.g. max temperatures). Fitting anti-theft systems must not alter the functioning of systems and components such as ABS, Tachograph, etc. The anti-theft system must not be connected to or interface with the EDC system other than as instructed by IVECO. Electrical connections either before or after the EDC control unit is strictly prohibited. Bodybuilder connectors Print 603.93.431 Base - July 2006 Revi - June 2007