MIL-HDBK-304C 3.0 DEFINITIONS 3.1 Acceleration. A vector quantity describing the time rate of change of velocity of a body in relation to a fixed reference point. 3.2 Amplification. As used in this document, the ratio of the peak acceleration response to an applied acceleration pulse. 3.3 Blocking. Relatively stiff materials used in packaging to immobilize items. 3.4 Compression set. The loss of cushion specimen thickness after a specified interval following removal of a compression load. 3.5 Container. As used in this document, any box, crate, can, or drum used as a unit pack to ship an item. 3.6 Container, exterior. As used in this document, the outermost container of a unit pack.
3.7 Container, interior pack. As used in this document, the container used internally in a unit pack. 3.8 Corrosion. The deterioration of a material by chemical action, usually as the result of oxidation, galvanic, acid, or alkali action. Corrosion can cause pitting or etching or the formation of loose or granular particles. 3.9 Creep. The strain-time response of a material to a constant stress or the dimensional change over time of a material under static load. Creep is expressed in percentage loss. 3.10 Cushioning. A material, as distinguished from a built-up device, used as to absorb the energy of shock and vibration through a gradual but increasing resistance to the movement of the item.
3.11 Cushioning Cost. A relative factor reflecting the cost elements of a particular cushioning material or system used in a specific application. 3.12 Cushioning, anomalous type. A cushioning material characterized by a force-displacement curve that does not correspond to any general type. 3.13 Cushioning, ideal type. A cushioning material that exerts a constant resistive force to variable material, displacement. Theoretically possible, but not attainable in practice. 3.14 Cushioning, tangent type. A cushioning material having a force-displacement curve that is linear material, at small values of displacement, but which increases non-linearly at tangent type higher values of displacement.
3.15 Damping. The dissipation of energy with time or distance. 3.16 Damping, critical. The minimum viscous damping that will allow a displaced system to return to its initial position without oscillation. 3.17 Damping ratio. The ratio of the system's critical damping to viscous damping. Viscous damping is the ratio of actual damping coefficient to the critical damping coefficient. 6 Downloaded from https://www.everyspec.com