MIL-HDBK-304C 3.18 Design, analytical. Design by calculation. 3.19 Design, empirical. Design by trial and error. 3.20 Displacement. A vector quantity describing the change of position of a body, point, or surface relative to a fixed reference point. 3.21 Dunnage. Packaging material that is used primarily to fill void spaces or to pad projections in packages. Not used to cushion against dynamic forces. 3.22 Dust. Fine particles that are liberated from a material as a result of agitation and which tend to remain airborne for an appreciable period of time. 3.23 Dusting test. A test to measure the propensity of a material to liberate dust. 3.24 Effective bearing area.
The item's surface area in the direction of impact. 3.25 Elasticity. The force-displacement characteristic of a material. 3.26 Encapsulation, complete. A method involving application of cushioning material completely around the entire exterior surface of an item. 3.27 Equivalent drop height. The height of free fall required by a body in a vacuum to attain a drop height particular instantaneous velocity. 3.28 Flotation. Completely encapsulated (see encapsulation, complete). 3.29 Fragility rating.
The ratio of the maximum acceleration that an object can safely withstand to the acceleration of gravity, or the maximum acceleration that any specific item can withstand in any direction before breakage, damage, or malfunction occurs (also (G-factor, G- value). 3.30 Fragments. Small material particles that are liberated as a result of agitation and tend to settle immediately after liberation. 3.31 Fragmentation. A test to measure the propensity of a material to liberate fragments (including dust particles) during handling. 3.32 Frequency. The number of repetitions of a periodic process in a unit of time. Generally measured in Hertz (Hz) or cycles per second. 3.33 Frequency, discrete.
A single, distinct frequency of sinusoidal oscillation. 3.34 Frequency of excitation. The frequency of an externally applied force or other input that causes the system to respond in some way. 3.35 Frequency, forcing. An input frequency of excitation. 3.36 Frequency, natural. The frequency produced by the system when a force is applied to the natural system and then withdrawn. 3.37 Frequency, resonant. A frequency at which resonance exists. (See Resonance). 7 Downloaded from https://www.everyspec.com