MIL-HDBK-304C 3.38 Hydrolytic stability test. A test to determine the resistance of a material to a combination of elevated temperature and humidity. 3.39 Immobilize. To make the external parts of an object essentially stationary relative to each other. 3.40 Isolator. A device or material used to reduce the severity of applied shock and/or vibration to a packaged item. 3.41 Nesting. As used in this document, cushioning a series of like items with intermediate layers of cushioning material. 3.42 Overshoot. Excessive momentary response of a recording system to an applied signal. 3.43 Pad, corner.
A tri-faceted cushion used at an interior corner of a shipping container to cushion a regularly shaped item or interior container. 3.44 Pad, face. A cushion that is applied adjacent to the face of an item or interior container in a package. 3.45 Peak Acceleration. The maximum acceleration recorded (after filtering) from a shock pulse. 3.46 Piezoelectric. The capability of some crystalline materials to generate an electric charge when stressed. 3.47 Preworking. Cyclic loading of a cushion prior to testing or use in order to produce essentially consistent compression characteristics. 3.48 Pulse rise time.
The interval of time required for the leading edge of a pulse to rise from some specified small fraction to some specified larger fraction of the maximum value (Frequently, "rise time" is taken to include the time required to increase from 1/10 to 9/10 of the maximum value.) 3.49 Recoverability. The ability of a cushioning material to regain its original dimensions following removal of a deformation-causing load. 3.50 Resonance. Resonance of a system exists when any change in the forcing frequency results in an extremely large vibration output. Resonance of a system also occurs when the forcing frequency equals the natural frequency. 3.51 Shock.
A sudden, severe non-periodic excitation of an object or system. 3.52 Shock pulse. A substantial disturbance characterized by a rise and decay of acceleration from a constant value in a short period of time. Shock pulses are normally displayed graphically as acceleration-time curves. 3.53 Shock pulse, simple. A shock pulse characterized by a smooth acceleration-time curve. 3.54 Shock pulse, complex. A shock pulse comprised of a wide range of frequency components that are not related harmonically to each other. 3.55 Shock Response Spectra.
A plot of the maximum acceleration experienced by a single- spectrum degree-of-freedom system as a function of its own natural frequency in response to an applied shock. 8 Downloaded from https://www.everyspec.com