MIL-HDBK-304C For a body in freefall, the following also applies: IF: V = V i - (-V f ) V = V i + (V f ) (5:3) AND: V i = 0 V f = (5:4) THEN: V = (5:5) Where: V = Change in Velocity (m/sec or in/sec) V i = Initial or rest velocity (m/sec or in/sec) V f = Final Velocity (m/sec or in/sec) g = 9.8 m/secІ or 386 in/ secІ h = container drop height In other words, the change in velocity equals the difference between initial velocity and final velocity. The initial velocity is generally the “at rest” velocity where the velocity would be zero. So the change in velocity would be equal to the final velocity or . 5.4 Shock Absorption Capability.
5.4.1 Peak Acceleration-Static Stress Curves as Shock Absorption Indicators. In general, peak acceleration-static stress curves have proved to be the most practical basis for indicating the shock absorption capability of cushioning materials and for solving problems of this nature. Peak acceleration-static stress curves are derived from dynamic compression test data according to the test procedure and computations given in paragraph 9.1.5. Essentially, this procedure involves impact tests with relatively rigid loading devices that strike the cushioning specimens squarely (thereby simulating flat drops). The specimens are mounted on a rigid impact base.
24 Downloaded from https://www.everyspec.com