N/A (no manufacturer mentioned) N/A — MIL-HDBK-304C Package Cushioning Design Handbook PDF Download

MIL-HDBK-304C rational selection of the most inexpensive material for particular applications requires an equitable computation based upon the principal elements of cost. Accordingly, the "Cushioning Cost Index" (Cx) is suggested herein as a reasonable basis for equitable comparison of cushioning costs. Cost comparison by equation ( 5:12 ) (See Table VII ) considers materials according to the required thicknesses as indicated by the method given in paragraph 5.4.3.1 (without extra thickness allowance for expected creep of the pad as determined in paragraph 5.10). This exclusion is considered expedient to simplify the cost comparison without introducing large error.

To determine the most economical cushioning material for particular applications, first decide which of the materials available will protect the item, according to the methods and consider- ations discussed elsewhere in Sections 5.0 and 6.0. Once the materials and cushioning application techniques have been selected, the appropriate information can be substituted in equation ( 5:16 ) and the most economical methods and materials computed. To further illustrate the use of equation ( 5:16 ), the following example is given ( Table VII ): PROBLEM:

Five rigid items, each 16 x 16 x 12-inches (400 x 400 x 300-mm) weighing 10 pounds (4.5 kg), and having a fragility rating of 50 Gs, must be packed individually in corrugated fiberboard boxes to withstand flat drops from a 30-inch (0.8 m) height. Because only five items are involved, complete encapsulation is considered to be the simplest and most economical cushioning application method (Section 6.0). By reference to the peak acceleration-static stress curves for 30-inch (0.8m) drop in Appendix B, it is determined that adequate protection would be afforded by materials 1 through 6, 12 through 15, 17 and 18 (see Table VIII for decoding). Of these, only 1 and 5 are stocked.

Therefore, determine which of the stocked materials are most economical for packaging the items separately by complete encapsulation. Packaging Cost Index: The format given in equation 5:16 has been developed to provide an orderly cost computation procedure. When the details are entered into the formula, the "cushioning cost index" (Cx) for each cushioning material will be the result. These values can then be compared to determine the most economical cushioning material to use. In this example, since Cx is lowest for material number 1, it is the least expensive material for this application.

TABLE VII Cushioning Cost Index Cost of Cost of Materials Cost of Labor Shipping Cx = [(VCm + Cp + Cic + Cec)] + [CL (Pp + Pic + Pec)] + [Cs] (5:16) n Where: V is the volume of cushioning material required to protect the item. Cm is the initial cost per unit volume of cushioning material (delivered to the package designer's plant) in dollars. n is the number of trips for the entire package. In the formula, those items divided by “n” will be reused for each trip. Cp is the material cost of platens or die-cut trays in dollars. 33 Downloaded from https://www.everyspec.com