N/A (no manufacturer mentioned) N/A — MIL-HDBK-304C Package Cushioning Design Handbook PDF Download

MIL-HDBK-304C 7.3.1 Reasons for Computer Design. The design procedures outlined in preceding sections of this chapter are, of necessity, detailed and often tedious. If all design possibilities are fully considered, including the many cushion materials, and comparative labor and transportation costs, the design procedure becomes very time-consuming. In fact, if this process is carried to the extreme of finding the absolute optimum design, the expense of the packaging engineer's labor may become a significant percentage of total package costs. 7.3.2 “Package Designer” Ordering Data.

A means by which these calculations may be simplified is available through a program which has been developed by the Air Force Packaging Technology and Engineering Facility (AFPTEF), Wright-Patterson AFB, in cooperation with Frontier Engineering, Inc., to find the most economical package cushioning design considering all of the parameters discussed above. The program called “Package Designer” is described in 7.3.3. U.S. Government offices may obtain the program by contacting: AFMC LSO/LOP, 5215 Thurlow Street, Wright-Patterson AFB OH 45433 937-257-4519 or DSN 787-4519, FAX 937-656-1350 or DSN 986-1350. U.S.

industry and foreign government/industry may obtain the program by submitting a request to: Federal Computer Products Center, National Technical Information Service (NTIS) U.S. Department of Commerce, 5285 Port Royal Road, Springfield VA 22161 703-487-4650, FAX 703-321-8547 Order #PB95-500369GE1 7.3.3 Cushion Design Program. "Package Designer" is a cushion design program which generates design information on peak acceleration for an existing cushion pack and assists in the design for complete cushioning encapsulation of an item and corner-pad cushioning design of an item.

Each of the options consider drop heights, dimensions, weight, fragility, container type, container materials, cost and mode of transportation. Costs and output results are either displayed to the screen or to both the screen and printer. An option is provided to make changes to the current input data and then rerun the analysis. The materials listed in the program are the same materials whose Peak Acceleration versus Static Stress curves are shown in Appendix B of this Handbook. 7.3.3.1 Basic Functions. "Package Designer" performs two basic functions.

The first function is a performance evaluation of a known package design or the determination of the package design for a specific item under known conditions. The second function lets the designer choose the cushion configuration. The first function (peak acceleration) is to determine the performance (fragility rating) of an existing package design. The package designer inputs information on the desired drop height, kind of material, weight, surface area (one fact at a time), and cushion thickness. The computer response (output) is in terms of the peak acceleration (fragility) that the packaged item would experience.

The process can be repeated as often as necessary to evaluate all surfaces of the item and for different materials and drop heights. The designer now uses the cushion configuration option. The designer chooses either corner pad or complete encapsulation. With these options, the packaging engineer can essentially design the total package. For each option the drop height, item dimensions, item weight, fragility, container style and material, and transportation mode and distance are the required input. The program then computes total costs for all materials available.

If a particular material is not feasible for an item (i.e., the cushion characteristics show that the cushion will not protect the item), it is not printed. All feasible materials are printed in order of increasing cost. 54 Downloaded from https://www.everyspec.com